Selecting the right sink based on size

How should I choose a suitable pressing sink when decorating? We can mainly grasp the size of the sink and the kitchen and the installation issues. Since the sink is used in a greasy kitchen environment, it has to adapt to this condition and then also meet the installation requirements of our entire kitchen countertop. Here's how to pick a suitable pressing sink based on size.

Here is the content:

l The depth of the sink

l The space of the kitchen

l The depth of the inner wall of the sink

l Kitchen window

The depth of the sink

The pressing sink is usually installed on the countertop of the cabinet, the depth of the kitchen cabinet is around 500-550mm, and the width of its countertop is between 550-650mm. The installation of the sink usually needs to leave 100-150 spare, so the width of the stainless-steel sink is mostly 450-500mm; basically, the depth of the pressing sink is about 200mm.

The space of the kitchen

When you choose the pressing sink, but also consider the size of the kitchen space, according to the actual situation choose a single bowl sink, double bowl sink, or muti-bowl sink. For example, if the installation of a sink countertop is more than 1200mm, we can consider installing a double sink; if less than 1200mm, we can consider installing a larger single sink; a large kitchen space is more suitable for three sinks. The size of the sink can also be selected according to personal habits, etc.

The depth of the inner wall of the sink

And in the purchase of pressing sinks, also can not only focus on the size of the sink area size but also pay attention to the depth of the inner wall of the sink! There is a lot to be said for this. Sink design is a certain depth standard, if the sink is too shallow and not deep enough, the water from the sink faucet will be splashed out. Under normal circumstances, the minimum depth of the sink has to be greater than 180mm, the depth of about 190mm ~ 210mm most appropriate, so that the most convenient to wash dishes, wash dishes, and not have to worry about the water in the sink splash out, wet themselves or get all over the place. The verticality of the basin wall is best at 90 degrees, if the water hole in the central position of the pressing sink, will make the cabinet space reduced, the water hole should be set back some, not only to increase the speed of the water but also to improve the utilization of space.

Kitchen window

When you choose the pressing sink, pay attention to whether the kitchen window is open or open, because many families will install the sink in the window position, if the kitchen is an open window, then you need to consider the location of the sink, so that the sink does not appear to block the window switch. When choosing a sink, you also need to pay attention to the material, color, and other aspects of the sink.

It is the responsibility of every manufacturer to produce pressing sinks that meet the standards to ensure the basic rights of customers and the healthy development of the market. LiangShun Kitchen and bath Co., Ltd. conducts several tests on the products before they leave the factory, and the quality pass rate is guaranteed. If you need to buy a sink, you can consider our cost-effective products.