RV sink finishes

We all know the RV. It’s both "room" and "car" two functions, but its properties are still a car, is a mobile, with the basic facilities necessary for the home of the vehicle type. So, it is only natural that the RV sink on the caravan is also essential. Let's look at the surface treatment of the RV sink.

Here is the content:

l Surface treatment

l Edge treatment

l Sink spray bottom

Surface treatment

There are five kinds of surface treatment of RV sink: sandblasted (brushed), sandblasted (matte pearl silver surface), polished (mirror surface), embossed, and crystal shot blasting.

Among them, the brushed basin is the original color of stainless steel, which has the advantage of the more you use the newer one.

Brushed is ground out with a grinding wheel; sandblasted electrified basin, the effect out of the pearl matte, its advantage is not oil, and beautiful, it should be said that it is more oil-proof, but in terms of wear resistance cannot catch up with embossing and crystal polishing.

Polished, is the most easily scratched basin, looks good, with a long time the most headache, the unsightliness. So basically no one uses it in the country; embossing, the use of embossed material made, but it is more expensive, it is very wear-resistant. Crystal blasting combines many advantages, so I think the more ideal surface treatment for RV sink is crystal blasting.

Edge treatment

Stainless steel RV bathroom sink on the market have a variety of edge treatments, including flat square corners, rounded corners, thin edges, beveled edges, floating edges, etc. Among them, the flat edge square corner can be done on the counter basin, can also be done under the counter basin, but because it is a square corner, on the one hand, the perspective effect is not very good, while its load-bearing weight is not very strong, plus it is easy to get the corners folded in the process of transportation, so less used; flip edge, on the one hand, to enhance the smoothness of the sink, on the other hand, strengthen the tendons, so that the sink load stronger, and has good water blocking effect, not to let the water flow to the cabinet countertop, many sink manufacturers like this side of the technology, but it must be a double layer to have an effect, you can see in the market, many are single-sided. At the same time, high-grade stainless steel RV bathroom sink sides are generally very flat, with no big bend.

Sink spray bottom

Some sinks for RV on the market are now sprayed with a variety of different colors and materials at the bottom of the paint, claiming to be sweat-proof and moisture-absorbing, how exactly? The main purpose of spraying the coating on the bottom of the sink is to prevent temperature difference condensation, protect the cabinet, and at the same time can reduce the noise of falling water, moisture absorption is only a secondary function or a different statement.

Every RV sink of LiangShun Kitchen and bath Co., Ltd. is strictly tested before leaving the factory, and we control the quality of every part from the source and test the samples, if the products do not reach satisfactory results, we will never ship them out.