How do I install a Commercial Sink?

Commercial Sink is one of the most important items to install in your kitchen. If there is a problem with the Commercial Sink, it is not only costly but also inconvenient to have it repaired by a professional. How do I install a steel kitchen sink in my kitchen? If you pay attention to a few details, you can install the Commercial Sink yourself at home.

Here is the content list:

l How to install Commercial Sink.

l What are the dos and don'ts of a Commercial Sink?

How to install Commercial Sink.

Before installing the Commercial Sink, you need to reserve a good location for the Commercial Sink. When purchasing the Commercial Sink, you need to inform the supplier of the size of the worktop to avoid reworking problems. Commercial Sink can be used normally after installation. Secondly, before installing the Commercial Sink, check carefully whether there is any leakage at the water pipe connection, if there is any leakage problem, replace the water pipe in time. It is best to choose a tap made of pure copper or stainless steel for better protection against rust and long service life. In addition, place the Commercial Sink in the reserved Commercial Sink position, install the matching pendant between the worktop and the Commercial Sink, ensure that the corner kitchen sink is firmly installed, and then carefully check whether the joints between the Commercial Sink and the worktop and the water pipes are tight. The final step in the Commercial Sink installation is the installation of the pegs, which are selected according to the distance between the Commercial Sink and the worktop to prevent shaking and leaking of the sink. Finally, the Commercial Sink is tested by filling it with water, checking for leaks, checking for smooth drainage, leaks, and seepage, and finally sealing the Commercial Sink with silicone to ensure that the seam between the Commercial Sink and the worktop is smooth. Finally, the Commercial Sink is sealed with silicone to ensure that the gaps between the kitchen sink gold and the worktop are even and consistent.

What are the precautions for a Commercial Sink?

Before installing the tap, the tap must be thoroughly checked for debris, as this may enter the tap and damage the spool and other seals, causing serious blockages. When installing bellows and braided pipes, be sure to pay attention to the tightening force, too much force will easily damage the threads, too little force and may not be sealed enough to cause leaks, so tighten the force to the right amount. The water temperature of the faucet should preferably not be greater than 90 degrees Celsius, this is to avoid damage to the surface of the faucet during the installation of the faucet, a faucet cover or faucet plastic bag should be placed over the faucet for the installation operation of the faucet. When installing Commercial Sink in the kitchen, in addition to the installation steps, it is also important to pay attention to aesthetics, as only correct installation will not affect later use.

If you are interested in our under-mount kitchen sink products or have other requirements, please do not hesitate to contact us. Our official website is https://www.liangshunkitchensink.com/. Our company adheres to the corporate culture of "Quality First, Customer First" and always strives to be the professional Commercial Sink supplier in the industry.